XJ Track Bar
Our Track Bar is constructed from 1.25" high carbon (1043) steel that is cold-formed with welded and forged axle end bushing shell. It offers 6" of 1.25x12 thread single point machined directly on bar itself. No die threading for weak threads. NO OTHER COMPANY USES THIS MUCH THREAD! The Adjuster sleeve made from 1.75x.281 DOM steel fully pulse MIG welded to 2.625" wide Enduro Joint. We use a Barnes4wd Enduro Joint allowing for 40-degree offset use for stretched front ends.
Designed for 3" of lift and above. Note: lifts under 4.5 inches must maintain proper bump stopping to clear all parts during complete suspension compression.
Optional Drop Pitman Arm and Track Bar Bracket
Adding our 1" drop pitman arm is a good idea for lifts over 6" in order to help maintain good steering geometry with your track bar.
This track bar is meant for a double shear bracket with an inner dimension of 2 5/8” and a 9/16” bolt hole. If you do not have one make sure to add the option.
Also checkout our complete track bar system!