ZJ Front 4 Link System

  • $1,700.00
    Unit price per 


Expect a 30 day build time on these. 

The 1993-1998 Jeep Grand Cherokee has become a common platform for an affordable off-road vehicle. Sadly the aftermarket has been dragging its feet for years to create an effective tunable platform for a real 4 link suspension for the front. With different driving styles and different terrains and uses, Grand Cherokee suspensions also need to be able to adapt to these terrains and uses. With that stated here is the IronMan4x4fab.com offering for that very purpose.  

This is a ¼” thick, A50, 6 piece cross member designed with suspension tuning in mind. With 4 lower link length locations and 4 upper link heights This system allows the suspension builder tune for low center of gravity setups for rocks or tall setups with more down force for mud. All of this benefit and it only hangs 2.25” below the chassis. This is better clearance than any other system that we are aware of!  Here are some more specs on this system.

This kit only includes the front 4 link system. Rear 4 link system sold seperately.

Links

  • Upper Links Double Adjustable - 36" Collapsed with 10" of adjustment
  • Lower Links Double Adjustable - 35" Collapsed with 4" of adjustment
  • Custom length lower beams available. 36",40", 48" 53"
  • Upper links are made out of 1.25" Solid 1045 CRS and machine threaded. 
  • Lower links are 3 side box formed beams and cap welded with threaded inserts
  • Ironman flex Joints are used at the frame and Clevite Rubber at the axle. 

Crossmember

  • Bolt on and weld on system for ultimate strength and rigidity. (must weld on)
  • All hardware is grade 8 or higher
  • Upper link mounts bolt from bottom with 12- ½” bolts per side.
  • Locates entirely on the bottom of the chassis so it works with all frame stiffeners.
  • Exhaust will require minor modification for clearance. 
  • Only sits 2.25” below chassis.
  • This kit is designed for our new rear 4 link to mate up to it.
  • Combined with our Adjustable Upper and Lower Links; you can adjust your anti-dive from 60% - 125%.

All Hardware will be provided for installation. Frame brackets must be welded on for offroad use. (Pictures show it is only bolted on, not welded)

Some transmissions have a 2 hole or 4 hole mount. We need to know which one you have. 2 hole mounts require a conversion bracket for the crossmember. 

This kit only includes the front 4 link system. Rear 4 link system sold seperately.

Expect a 30 day build time on these.

Made 100% in the USA 

Shipping will be added at checkout


We Also Recommend